Improving selectivity in gas chromatography by using chemically modified multi-walled carbon nanotubes as stationary...

Amino-terminated alkyl MWCNTs (MWCNTs-R-NH(2)), synthesized by chemical modification of the nanotube skeleton by nucleophilic substitution with 2,2'-(ethylenedioxy)diethylamine, were successfully used as stationary phases for gas chromatographic separation of esters and chloroaromatics. The presence of alkyl chains with polar embedded groups made the functionalized MWCNTs (f-MWCNTs) a mixed-mode GC separation material able to interact in different ways with the analytes. Compared with non-functionalized MWCNTs (nf-MWCNTs), MWCNTs-R-NH(2) had higher selectivity, enhanced resolution, and optimum retention behaviour, and they were proved to perform better than the commercial stationary phase Porapak QS (PQS), claimed to be suitable for similar applications. The so-prepared stationary phase was used for analysis of a synthetic mixture containing different classes of analytes, viz. esters, ketones, alcohols, alkanes, and aromatic hydrocarbons, and finally used for investigation of similar real matrices. In particular, the constituents of a commercial paint thinner were determined by direct injection of the sample, with good reproducibility (inter-day precision RSDs from 5 to 19%). Two unknown samples of commercial white spirit were also analysed for determination of the aromatic hydrocarbon content, and their composition was profiled on the basis of the different compounds identified.