Nanopatterning of ultrananocrystalline diamond nanowires

We report the fabrication of horizontally aligned ultrananocrystalline diamond (UNCD) nanowires (NWs) via two different approaches. First, with the top-down approach by using electron beam lithography (EBL) and reactive ion etching (RIE) with a photo resist layer as an etch mask. Using this approach, we demonstrate fabrication of 50 µm long UNCD NWs with widths as narrow as 40 nm. We further present an alternative approach to grow UNCD NWs at pre-defined positions through a selective seeding process. No RIE was needed either to etch the NWs or to remove the mask. In this case, we achieved UNCD NWs with lengths of 50 µm and smallest width of 90 nm respectively. Characterization of these nanowires by using scanning electron microscopy (SEM) and atomic force microscopy (AFM) shows that the UNCD NWs are well defined and fully released, with no indication of residual stress. Characterization using visible and ultraviolet (UV) Raman spectroscopy indicates that in both fabrication approaches, UNCD NWs maintain their intrinsic diamond structure.