Related Experiment Video
Updated: May 25, 2026

Scalable Solution-processed Fabrication Strategy for High-performance, Flexible, Transparent Electrodes with Embedded Metal Mesh
Published on: June 23, 2017
MgO nano-facet embedded silver-based dielectric/metal/dielectric transparent electrode
Sungjun Kim1, Hak Ki Yu, Kihyon Hong
1Department of Materials Science and Engineering, Division of Advanced Materials Science, Pohang University of Science and Technology (POSTECH), Pohang, Gyeongbuk, South Korea.
Abstract:
We replace Indium Tin Oxide (ITO) with an MgO nano-facet Embedded WO(3)/Ag/WO(3)(WAW) multilayer for electrodes of high efficiency OLEDs. WAW shows higher values for transmittance (93%) and conductivity (1.3×10(5) S/cm) than those of ITO. Moreover, WAW shows higher transmittance (92.5%) than that of ITO (86.4%) in the blue region (<500 nm). However, due to the large difference in refractive indices (n) of glass (n=1.55) and WO(3) (n=1.95), the incident light has a small critical angle (52°). Thus, the generated light is confined by the glass/WAW interface, resulting in low light outcoupling efficiency (~20%). This can be enhanced by using a nano-facet structured MgO (n=1.73) layer and a ZrO(2) (n=1.84) layer as a graded index layer. Using these optimized electrodes, ITO-free, OLEDs with various emission wavelengths have been produced. The luminance of OLEDs using MgO/ZrO(2)/WAW layers is enhanced by 24% compared to that of devices with ITO.
More Related Videos
08:12Ohmic Contact Fabrication Using a Focused-ion Beam Technique and Electrical Characterization for Layer Semiconductor Nanostructures
Published on: December 5, 2015
06:34Application of a Coupling Agent to Improve the Dielectric Properties of Polymer-Based Nanocomposites
Published on: September 19, 2020