Related Experiment Video

Updated: May 25, 2026

A Novel Bioreactor for High Density Cultivation of Diverse Microbial Communities
08:13

A Novel Bioreactor for High Density Cultivation of Diverse Microbial Communities

Published on: December 25, 2015

Industrial wastewater platform: upgrading of the biological process and operative configurations for best performance

Anna Laura Eusebi1, Alessandro Massi, Emiliano Sablone

  • 1Department SIMAU, Università Politecnica delle Marche, Via Brecce Bianche, 60100 Ancona, Italy. a.l.eusebi@univpm.it

Water Science and Technology : a Journal of the International Association on Water Pollution Research
|January 27, 2012
PubMed

More Related Videos

Continuously-stirred Anaerobic Digester to Convert Organic Wastes into Biogas: System Setup and Basic Operation11:31

Continuously-stirred Anaerobic Digester to Convert Organic Wastes into Biogas: System Setup and Basic Operation

Published on: July 13, 2012

Scalable Step-by-Step Approach of Sustainable Bioplastic Production from Food Waste08:14

Scalable Step-by-Step Approach of Sustainable Bioplastic Production from Food Waste

Published on: July 18, 2025

Related Concept Videos

Bioreactor Design and Operational System01:29

Bioreactor Design and Operational System

Bioreactors are engineered vessels designed to cultivate microorganisms under controlled conditions for industrial bioprocessing. They maintain sterility and allow precise regulation of pH, temperature, oxygen, and nutrient levels to optimize microbial growth and metabolite production. Bioreactors range from small laboratory units of 1 liter to industrial systems holding up to 500,000 liters, though only about 75% of their volume is actively used for fermentation. The remaining headspace...
Scale-Up Processes01:14

Scale-Up Processes

The scale-up of microbial fermentation processes is essential in industrial biotechnology, allowing the transition from laboratory-scale experiments to commercial-scale production while aiming to maintain product yield and quality. This process requires meticulous adjustment of equipment design, process parameters, and contamination control strategies to accommodate increasing culture volumes.At the laboratory scale, cultures are typically maintained in 1 to 10-liter glass or autoclavable...
Upstream Processing01:27

Upstream Processing

Upstream processing represents a critical phase in biomanufacturing, wherein biological systems such as microorganisms, mammalian cells, or insect cells are cultivated to produce therapeutic proteins, vaccines, enzymes, or other biologically derived products. This phase encompasses all steps from the selection and genetic manipulation of the production organism to the cultivation of cells in bioreactors under tightly controlled environmental conditions.Host Selection and Genetic OptimizationThe...
Bioreactor Controls-III01:22

Bioreactor Controls-III

Strain improvement is a foundational strategy in industrial microbiology aimed at maximizing microbial productivity, particularly because natural isolates typically yield commercially valuable products in very low concentrations. Although optimizing the culture medium and environmental conditions can improve yields, these adjustments are inherently limited by the organism’s genetic potential. As a result, the focus shifts toward genetic modifications to enhance biosynthetic capacity. The...
Bioreactor Controls-II01:18

Bioreactor Controls-II

In aerobic fermentations, oxygen is vital for microbial growth and metabolite production. Since air comprises only about 20% oxygen and the gas is poorly soluble in water—just 9 ppm at 20°C—supplying sufficient oxygen becomes a critical challenge, especially in high-demand processes like yeast growth or citric acid production. Even a fully saturated broth may offer only a few seconds of oxygen availability.To address this, sterile or scrubbed air is introduced into the fermentor via a sparger...
Bioreactor Controls-I01:28

Bioreactor Controls-I

Maintaining optimal conditions within fermenters is essential for maximizing microbial productivity and ensuring process efficiency. This lesson focuses on key parameters—temperature, foam, pH, carbon dioxide, oxygen, and pressure—and their precise measurement and control strategies in fermentation systems.Temperature ControlTemperature regulation is critical due to the exothermic nature of many fermentation processes. In small laboratory fermenters, temperature is commonly monitored using...