Stability and aerosolization of pressurized metered dose inhalers containing thymopentin nanoparticles produced using...

The objective of this study was to investigate the stability and aerosolization of pressurized metered dose inhalers (pMDIs) containing thymopentin nanoparticles. Thymopentin nanoparticles, fabricated by a bottom-up process, were suspended in hydrofluoroalkane (HFA) 134a together with cineole and/or n-heptane to produce pMDI formulations. The stability study of the pMDIs obtained was carried out at ambient temperature for 6 months. The amount of thymopentin and the aerosolization properties of pMDIs were determined using high-performance liquid chromatography (HPLC) and a twin-stage impinger (TSI), respectively. Based on the results, thymopentin nanoparticles were readily suspended in HFA 134a with the aid of cineole and/or n-heptane to form physically stable pMDI formulations, and more than 98% of the labeled amount of thymopentin and over 50% of the fine particle fraction (FPF) of the pMDIs were achieved. During storage, it was found that for all pMDIs more than 97% of the labeled amount of thymopentin and FPF greater than 47% were achieved. Moreover, the size of thymopentin nanoparticles in propellant containing cineole and n-heptane showed little change. It is, therefore, concluded that the pMDIs comprising thymopentin nanoparticles developed in this study were stable and suitable for inhalation therapy for systemic action.