Ion energy distribution functions of low energy beams formed by wire extraction electrodes
S Tokumura1, T Kasuya, M Vasquez
1Graduate School of Engineering, Doshisha University, Kyotanabe, Kyoto 610-321, Japan. dtl0186@mail.doshisha.ac.jp
Abstract:
The two-electrode extractor system made of 0.1 mm diameter tungsten wires separated by 0.7 mm has formed an argon ion beam with 50 V extraction potential. Energy spreads of the extracted beams were typically less than 2 eV when the beam current density was low. The beam intensity rapidly decreased as the distance between the extractor and the beam detector increased, indicating space charge limited transport of the beam. Problems associated with the emittance measurements are also discussed.
Related Concept Videos
Energy Associated With a Charge Distribution
Energy Stored In A Coaxial Cable
In the simplest form, a coaxial cable can be represented by two long hollow concentric cylinders in which the current flows in opposite directions. The magnetic field inside and outside the coaxial cable is determined by using Ampère's law. The magnetic field inside...
The Electrical Double Layer
Induced Electric Fields: Applications
Continuous Charge Distributions
The electric charge can also be subjected to an analogical...
Energy In A Magnetic Field
Take an ideal inductor with zero resistance. Although it's practically impossible, assume that the coil's resistance is so small that it is practically negligible. The loss of the field's energy to dissipate thermal energy (or heat) is thus negligible.
The energy...


