Related Experiment Video
Updated: May 24, 2026

Confocal Imaging of Confined Quiescent and Flowing Colloid-polymer Mixtures
Published on: May 20, 2014
Effect of mesoscopic fillers on the polymerization induced viscoelastic phase separation at near- and off-critical
Yi Liu1, Xinhui Zhong, Guozhu Zhan
1State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Fudan University, Shanghai, China.
Abstract:
We have investigated the effect of mesoscopic fillers on the polymerization induced viscoelastic phase separation of thermoplastic modified thermosets at near- and off-critical concentrations using optical microscopy, time-resolved light scattering, dynamic mechanical analyses, and rheological instrument. Mesoscopic fillers including sepiolite and nanosized silica showed a significant enhancement effect in viscoelastic phase separation, and resulted in pronounced differences in the phase structures at all concentrations of polyetherimide modified epoxy resins with dynamic asymmetry. For blends near critical concentration, the introduction of fillers led to much finer phase structure with smaller characteristic length scale. At off-critical composition (i.e., blends with low concentration of slow dynamic component), the strong polymer chain entanglement resulted in enwrapped mesoscopic fillers within a slow dynamic phase. The rheological behavior of the blends clearly demonstrated the significant enhancement effect of mesoscopic fillers in the viscoelastic phase separation. The apparent activation energy of polymer chain mobility obtained from dynamic mechanical study of glass transition reflected strong wrapping behavior of polymer chains on mesoscopic fillers, which were consistent with the rheological and light scattering study.
Related Concept Videos
Determination of Molar Masses of Polymers II
Molecular Weight of Step-Growth Polymers
As the step-growth polymerization involves step-wise condensation of monomers, the molecular weight also builds up eventually. Consequently, high molecular weight polymers are obtained at the late stages of the polymerization, where 99% of monomers have been consumed.
The extent of the...
Polymer Classification: Crystallinity
Crystalline domains are the regions where polymer chains are aligned in an orderly manner and held together in proximity by intermolecular forces. For example, chains in the crystalline domains of polyethylene and nylon are bound together by van der Waals...
Polymer Classification: Stereospecificity
Determination of Molar Masses of Polymers I

