Analysis of fouling mechanisms in anaerobic membrane bioreactors

Amine Charfi1, Nihel Ben Amar, Jérôme Harmand

  • 1Laboratoire de Modélisation Mathématique et Numérique dans les Sciences de l'Ingénieur, ENIT, B.P 37 Le Belvédère, 1002 Tunis, Tunisia.

Water Research
|March 9, 2012
PubMed

Related Concept Videos

Bioreactor Controls-II01:18

Bioreactor Controls-II

In aerobic fermentations, oxygen is vital for microbial growth and metabolite production. Since air comprises only about 20% oxygen and the gas is poorly soluble in water—just 9 ppm at 20°C—supplying sufficient oxygen becomes a critical challenge, especially in high-demand processes like yeast growth or citric acid production. Even a fully saturated broth may offer only a few seconds of oxygen availability.To address this, sterile or scrubbed air is introduced into the fermentor via a sparger...
Bioreactor Design and Operational System01:29

Bioreactor Design and Operational System

Bioreactors are engineered vessels designed to cultivate microorganisms under controlled conditions for industrial bioprocessing. They maintain sterility and allow precise regulation of pH, temperature, oxygen, and nutrient levels to optimize microbial growth and metabolite production. Bioreactors range from small laboratory units of 1 liter to industrial systems holding up to 500,000 liters, though only about 75% of their volume is actively used for fermentation. The remaining headspace...
Microbial Mats01:25

Microbial Mats

Microbial communities forming biofilms and mats represent complex, spatially structured ecosystems where metabolic processes are stratified according to light, oxygen, and nutrient gradients. Biofilms are initial colonization stages, only a few millimeters thick, while mature microbial mats can reach centimeter-scale thickness and display intricate vertical organization. Their structural and functional heterogeneity allows microorganisms to occupy distinct ecological niches within a few...
Bioreactor Controls-I01:28

Bioreactor Controls-I

Maintaining optimal conditions within fermenters is essential for maximizing microbial productivity and ensuring process efficiency. This lesson focuses on key parameters—temperature, foam, pH, carbon dioxide, oxygen, and pressure—and their precise measurement and control strategies in fermentation systems.Temperature ControlTemperature regulation is critical due to the exothermic nature of many fermentation processes. In small laboratory fermenters, temperature is commonly monitored using...
Biofilms01:29

Biofilms

Biofilms are complex communities of microorganisms encased in a self-produced extracellular polysaccharide matrix attached to surfaces. These microbial consortia can include single or multiple species, providing enhanced survival benefits by forming organized, multilayered structures.The formation of biofilms occurs through four key stages: attachment, colonization, development, and dispersal.During attachment, free-swimming planktonic cells adhere to a surface, often facilitated by...
Microbial Bioremediation of Hydrocarbons01:26

Microbial Bioremediation of Hydrocarbons

Bioremediation is an environmentally sustainable process that employs living organisms—primarily microorganisms—to degrade or neutralize pollutants from contaminated environments. In oil spills and hydrocarbon pollution, bioremediation involves the use of hydrocarbon-degrading bacteria to transform toxic compounds into less harmful substances. This approach leverages natural microbial metabolic processes and is considered both cost-effective and ecologically favorable compared to physical or...