Thermodynamic study of molecularly imprinted polymer used as the stationary phase in high performance liquid
Natalia Denderz1, Jozef Lehotay, Jozef Cižmárik
1Institute of Analytical Chemistry Faculty of Chemical and Food Technology, Slovak University of Technology in Bratislava, Radlinského 9, 812 37 Bratislava, Slovak Republic.
Abstract:
Molecularly imprinted polymer (MIP) and non-imprinted polymer (NIP) on the base of methacrylic acid prepared by a bulk polymerization were used as stationary phases for the HPLC analysis. The thermodynamic processes were carried out to investigate the temperature effects during sorption processes of potential local anaesthetics - morpholinoethyl esters of alkoxy-substituted phenylcarbamic acid (MEsP), local anaesthetic - diperodon, flavonoid - quercetin in methanol, acetonitrile and toluene (porogen) as mobile phases. Mobile phases and corresponding solvents were selected according to the solubility of each analyte. The template was chosen from the set of homologous of MEsP - 2-(morpholin-4-yl)ethyl (2-methoxyphenyl)carbamate. Values of retention factors were measured over the temperature range of 20-60°C. There were determined van't Hoff curves - dependences between logarithms of the retention factors (lnk) and the inverse value of the temperature (1/T). Observed graphs were linear directly indicating that there were no changes of interaction mechanisms in the studied range of temperature. Selectivities (evaluated by the separation factors, α) and sorption selectivities (evaluated by the imprinting factors, IFs) of the MIP and the NIP toward template, related and not-related structures with the template were evaluated chromatographically. The highest separation factors and the imprinting factors (IF=4.73 ± 0.35 for the template) were observed in methanol, not in porogen. Only in the case of quercetin the highest IF was observed in ACN (1.88 ± 0.13). Contrary to expectations, the driving force for the affinity of the target molecules for both of polymers was enthalpic term (with an average of 54%, 82% and 84% contribution of enthalpic term for MeOH, ACN and toluene, respectively on the MIP and 53%, 57% and 65% for MeOH, ACN and toluene, respectively on the NIP). The MIP and NIP were also characterized by attenuated total reflectance analysis Fourier transform infrared spectroscopy (ATR-FTIR) and thermogravimetric analysis (TGA).
More Related Videos
Related Concept Videos
High-Performance Liquid Chromatography: Introduction
In HPLC, two phases play a critical role in the separation process:
High-Performance Liquid Chromatography: Elution Process
High-Performance Liquid Chromatography: Instrumentation
Gas Chromatography: Types of Columns and Stationary Phases
For an analyte to remain on the column for a sufficient amount of time, it must exhibit some level of compatibility (or...
Ion-Exchange Chromatography
Thin-Layer Chromatography (TLC): Overview
To begin the analysis, a mixture of compounds is spotted on the starting line on the TLC plate using a thin capillary. The bottom of the...


