A nonelutable low-molecular weight heparin stent coating for improved thromboresistance

Low-molecular weight heparin (LMWH) has been widely used as a systemic anticoagulant during percutaneous coronary intervention. In this study, LMWH was covalently immobilized to the surface of a cobalt chromium reservoir-based sirolimus-eluting stent to create a nonelutable nanoscale coating for enhanced thromboresistance. Toludine-blue stained stents revealed uniform heparin coverage on all surfaces of the stent. Scanning electron microscopy of stent strut cross-sections showed identical coating thickness on all sides; while the thickness was determined to be 320 nm by a focus-ion beam system. Secondary ion mass spectrometry showed constant concentrations of O, N, and S atoms throughout the depth of the surface, confirming the uniformity of the heparin coating. The nonelutable nature of the coating was confirmed in a modified Factor Xa inhibition assay which showed the stent had an equivalent of 3-5 heparin units/cm(2), while no elutable heparin was detected in wash solutions. The antithrombin binding capacity of the immobilized heparin was determined to be 60-80 pmol/cm(2) in an antithrombin uptake assay. The enhanced thromboresistance of the heparin coating was demonstrated in an in-vitro bovine blood flow loop which showed minimal visual thrombus accumulation and 95% reduction in platelet deposition compared to uncoated control stents. Drug-eluting stents with such nonelutable LMWH coating would represent a significant advance in the treatment of patients with complex lesions who are at increased risk of developing stent thrombosis.