Sonophotolytic diethyl phthalate (DEP) degradation with UVC or VUV irradiation
Seungmin Na1, Cai Jinhua, Mingcan Cui
1School of Civil, Environmental and Architectural Engineering, Korea University, Seoul, Republic of Korea.
Abstract:
This study investigated the degradation of diethyl phthalate (DEP) by sonolytic, photolytic and sonophotolytic processes. Two types of UV lamps, UVC (254 nm) and VUV (185 nm+254 nm), were combined with ultrasound (283 kHz). The pseudo-first order degradation rate constants were in the order of 10(-1)-10(-3) min(-1) depending on the processes. The sonolytic DEP degradation rate increased with increasing applied power. Photolytic or sonophotolytic degradation of DEP when using a VUV lamp appeared to be effective because the photo ІІ (UVC/VUV) resulted in a significantly faster degradation than the photo І (UVC) processes due to the higher photon energy and higher hydroxyl radical generation by homolysis of water by VUV. Significant degradation and mineralization (TOC) of DEP were observed with the combined sonophotolytic processes. Moreover, synergistic effects of 1.68 and 1.23 were exhibited at DEP degradation of the sonophoto I and sonophoto II processes, respectively. This was attributed to the UV-induced dissociation of hydrogen peroxide (H(2)O(2)) generated by the application of US to hydroxyl radicals. Therefore, US in sonophotolytic processes can play an important role in enhancing DEP degradation. Moreover, the sonophoto ІІ process is more effective on the mineralization and biodegradability of DEP.
More Related Videos
06:46Collection of Alfalfa Root Exudates to Study the Impact of Di(2-ethylhexyl) Phthalate on Metabolite Production
Published on: June 2, 2023
11:04An In-House-Built and Light-Emitting-Diode-Based Photodynamic Therapy Device for Enhancing Verteporfin Cytotoxicity in a 2D Cell Culture Model
Published on: January 13, 2023
Related Concept Videos
Microbial Bioremediation of Plastics
¹³C NMR: Distortionless Enhancement by Polarization Transfer (DEPT)
Microbial Bioremediation of Pesticides
Types of Step-Growth Polymers: Polyesters
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the polymer...
Bioplastics
