Related Experiment Video
Updated: May 23, 2026

An Air-liquid Interface Bronchial Epithelial Model for Realistic, Repeated Inhalation Exposure to Airborne Particles for Toxicity Testing
Published on: May 13, 2020
Simulated downwind coal combustion emissions for laboratory inhalation exposure atmospheres
Jacob D McDonald1, Richard K White, Tom Holmes
1Lovelace Respiratory Research Institute , Albuquerque, NM 87108, USA. jmcdonal@lrri.org
Abstract:
Exposure atmospheres for rodent inhalation toxicology studies were generated to enable the evaluation of biological responses to a simulated downwind coal combustion atmosphere. A composition representing a single test case of emissions components as they may exist tens to hundreds of miles from a coal-fired power plant was developed. The particulate matter (PM) was 99% sulfate (partially neutralized) and 1% ash. Sulfate was present in equimolar concentrations to sulfur dioxide (SO₂). Gaseous nitrogen species included nitrogen monoxide (NO), nitrogen dioxide (NO₂), and nitric acid (HNO₃). At the high-exposure level, the gaseous species target concentrations were 0.2 ppm SO₂, 0.6 ppm NO, 0.3 ppm NO₂, and 0.1 ppm HNO₃. The test atmosphere was produced by combining effluent from a laboratory coal combustor with sulfate generated through an evaporation-condensation generator. These atmospheres were used to conduct inhalation toxicology studies that have been previously reported.

