A new collector for in situ pore water sampling in wetland sediment

Currently available pore water samplers generally do not allow continuous monitoring of temporal variations in pore water composition. Therefore, a new type of pore water collector was designed and constructed. These collectors were constructed of polyvinyl chloride (PVC) materials, including PVC tubing with one end sealed and another end topped with a removable PVC screw-cap. A row of holes was drilled 10 cm from the sealed end of each collector. These new collectors were deployed in different layers of the sediment in a constructed wetland in Lake Taihu, China, to reveal variations in the nutrient composition of pore water with high spatial and temporal resolution. Specifically, the collectors were driven into the sediment, and the pore water flowed into the tubing via gravity. The pore water was then sampled from the PVC tubing using a portable vacuum pump, and then was taken to the lab within 20 min for analysis of the dissolved oxygen (DO) and nutrient concentration. The DO concentration of the pore water was below the detection limit for all samples, indicating that the pore water was probably not influenced by the air and that the water in the collector tube was representative of the pore water. These findings suggest that the collector is capable of measuring the temporal and spatial variations in the nutrient concentrations in pore water. Furthermore, the inexpensive material, ease of construction, minimal disturbance to the sediment and applicability for wetland sediments are advantages of the collector presented here compared with traditional pore water sampling techniques.