Related Experiment Video
Updated: May 22, 2026

Chromatographic Fingerprinting by Template Matching for Data Collected by Comprehensive Two-Dimensional Gas Chromatography
Published on: September 2, 2020
Novel hybrid comprehensive 2D-multidimensional gas chromatography for precise, high-resolution characterization of
Blagoj Mitrevski1, Philip J Marriott
1Centre for Green Chemistry, School of Chemistry, Monash University, Wellington Road, Clayton 3800, Australia.
Abstract:
A novel hybrid (sequential) comprehensive 2D-multidimensional gas chromatography (GC × GC-MDGC) method for complex sample manipulation and separation is described. It incorporates a separation step that approximates slow modulation GC × GC, prior to microfluidic Deans switch heart-cutting of a targeted region(s) into a third analytical column. It allows discrete single or multiple components, bands or regions, or any combination of these to be selected and excised from within the 2D GC × GC separation space. The excised individual components can be further collected and studied. Alternatively, any unresolved or poorly resolved components, or regions that require further separation, can be transferred to an additional (third) column separation step. The method is applied to separation and quantitative analysis of oxygenates in a thermally stressed algae-derived biofuel oil by using flame ionization detection (FID), without any prefractionation. This permits oxygenated compounds to be fully resolved from saturated (matrix) compounds, which are completely excluded from the third column. Improved separation was obtained between target classes (aldehydes, 2-ketones, alcohols, acids). Excellent calibration linearity, and retention time and peak area reproducibility were obtained for 14 oxy-compounds present in trace amount in the complex biofuel matrix. Accuracy of microfluidic transfer to the third column, and the profile reproducibility before and after heart-cut operations, was demonstrated by extracting single components from a complex coffee volatile sample.
More Related Videos
08:22Nitrogen Compound Characterization in Fuels by Multidimensional Gas Chromatography
Published on: May 15, 2020
11:44Qualitative Characterization of the Aqueous Fraction from Hydrothermal Liquefaction of Algae Using 2D Gas Chromatography with Time-of-flight Mass Spectrometry
Published on: March 6, 2016
Related Concept Videos
Gas Chromatography–Mass Spectrometry (GC–MS)
A gas chromatograph consists of a long, narrow capillary column with a polysiloxane coating on the inner wall. The coating...
Mass Spectrometry: Complex Analysis
GC–MS is a powerful hyphenated method commonly used in forensics and environmental...
Gas Chromatography: Introduction
In GC, a sample is vaporized and mixed with an inert carrier gas (the mobile phase), which transports it through a column.
Gas Chromatography: Overview of Detectors
A non-destructive detector allows a sample to be analyzed without altering or consuming it, meaning the sample can be collected after detection for further analysis. Examples include thermal conductivity detectors and...
Gas Chromatography: Types of Detectors-II
High-Resolution Mass Spectrometry (HRMS)