Emissions from open burning of used agricultural pesticide containers

Emissions from simulated open burning of used agricultural pesticide containers were sampled for polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDDs/PCDFs), polycyclic aromatic hydrocarbon compounds (PAHs), and particle matter (PM(10) and PM(2.5)). Clean high density polyethylene (HDPE) containers, containers with trace pesticide, and triple-rinsed containers were burned separately in an open combustion facility and their emissions compared. Two common chlorinated pesticides were used: 2,4-dichlorophenoxyacetic acid (2,4-D) and 1-chloro-3-ethylamino-5-isopropylamino-2,4,6-triazine (atrazine). PCDD/PCDF emission factors ranged from 0.1 to 24ng toxic equivalents (TEQ)/kg C burned with a mean and median of 4.9 and 1.9ng TEQ/kgC burned, respectively. In a limited number of trials, the trace 2,4-D in the HDPE container led to a statistically significant increase in PCDD/PCDF formation compare to all other conditions. Residual atrazine did not lead to more PCDD/PCDF than the unrinsed 2,4-D container. Total (16 compounds) PAH emission factors varied from 1.5 to 6.7mg/kgC burned. These limited data suggest that rinsing the 2,4-D container prior to burning reduces both PCDD/PCDF and PAH emissions. Nine PM(2.5) emission factors ranged from 9 to 35mg/gC burned and ten PM(10) values ranged from 6 to 43mg/gC burned. Neither pesticide appeared to have any effect on PM concentration.