Kinetics of UV inactivation of wastewater bioflocs

Ultraviolet disinfection is a physical method of disinfecting secondary treated wastewaters. Bioflocs formed during secondary treatment harbor and protect microbes from exposure to ultraviolet (UV) light, and significantly decrease the efficiency of disinfection at high UV doses causing the tailing phenomena. However, the exact mechanism of tailing and the role of biofloc properties and treatment conditions are not widely understood. It is hypothesized that sludge bioflocs are composed of an easily disinfectable loose outer shell, and a physically stronger compact core inside that accounts for the tailing phenomena. Hydrodynamic shear stress was applied to the bioflocs to peel off the looser outer shell to isolate the cores. Biofloc and core samples were fractionated into narrow size distributions by sieving and their UV disinfection kinetics were determined and compared. The results showed that for bioflocs, the tailing level elevates as the biofloc size increases, showing greater resistance to disinfection. However, for the cores larger than 45μm, it was found that the UV inactivation curves overlap, and show very close to identical inactivation kinetics. Comparing bioflocs and cores of similar size fraction, it was found that in all cases cores were harder to disinfect with UV light, and showed a higher tailing level. This study suggests that physical structure of bioflocs plays a significant role in the UV inactivation kinetics.