Related Experiment Video
Updated: May 22, 2026
Preparation of Light-responsive Membranes by a Combined Surface Grafting and Postmodification Process
Published on: March 21, 2014
Post treatment of plasma-polymerized SnOx organic-like films with poly ethylene glycol for improving CO gas
Shu-Chuan Liao1, Hsin-Ming Wu, Yu-Chia Tsao
1Department of Materials Engineering, Tatung University, Taipei 104, Taiwan.
Abstract:
In this study, a new room temperature type gas sensor device based on plasma deposition of tetramethyltin (TMT) and O2 organically hybridized film followed by post treatment on the deposited film was developed for improving CO gas sensitivity and distinguishing from methane, butane, and carbon monoxide gases in the test environment. Plasma deposited SnOx thin film was first produced from TMT and O2 gas mixtures at room temperature, and then post treatments on the SnOx thin films were carried out by either spin coating with poly ethylene glycol (PEG) or surface grafting with p-styrenesulfonic acid sodium salt (Nass). It was found that the gas sensor spin coating post treated with PEG exhibits linear response to CO gas with the sensitivity not affected by methane and butane gases. For CO concentrations ranging from 30 to 650 ppm, steep change in the sensor resistance can be detected without warming up the sensor.
