Related Experiment Video
Updated: May 21, 2026

Synthesis of Hydrogels with Antifouling Properties As Membranes for Water Purification
Published on: April 7, 2017
Creating water vapor barrier coatings from hydrophilic components
Gerald Findenig1, Simon Leimgruber, Rupert Kargl
1Division of Surface and Interface Science, Institute of Chemistry, Karl-Franzens-University Graz , Heinrichstraße 28, A-8010 Graz.
Abstract:
The preparation of water vapor barrier coatings composed of polyelectrolyte/clay multilayers using the layer-by-layer technique is reported. The suitability of different synthetic and renewable polyelectrolytes for the preparation of barrier coatings in combination with montmorillonite (MMT) platelets as well as the influence of the ionic strength and the number of bilayers on the coating performance was investigated. Highly hydrophilic and permeable cellulose films were used as substrate for determining the influence of the coatings on the water vapor transmission rate (WVTR). Improved barrier properties were realized by the use of polyethylene imine (PEI) or 2-hydroxy-3-trimethylammonium propyl chloride starch (HPMA starch) in combination with MMT. After the application of only 5 bilayers of PEI and MMT (thickness ∼40 nm) on each side of the cellulose film, the WVTR was significantly reduced. By the deposition of 40 PEI/MMT bilayers, the WVTR transmission rate was reduced by 68%. However, HPMA starch containing coatings led to vapor transmission reduction of up to 32% at the same number of coating steps. A strong correlation between the barrier properties of the coatings and the layer thickness was observed. The barrier properties of the coatings could be increased using higher ionic strengths. These results represent unprecedented water vapor barrier properties for coatings prepared from hydrophilic materials.
Related Concept Videos
Waterproofing and Anti-Bacterial Admixtures in Concrete
Waterproofing admixtures render concrete hydrophobic,...
Aldehydes and Ketones with Water: Hydrate Formation
The formation of hydrates is a reversible reaction. Hydrate formation is influenced by steric and electronic factors accompanying the alkyl substituents on the carbonyl group: The rate of hydrate formation increases with a decrease in the number of alkyl groups attached to the carbonyl carbon. Hence,...
Hydrolysis
Hydrolysis is a chemical reaction in which the addition of water breaks down a polymer into its simpler monomer units. For example, peptides break into amino acids, carbohydrates into simple sugars, and DNA into nucleotides. Enzymes often facilitate these processes.
Hydrolysis Reverses Dehydration Synthesis
Complex carbohydrates can be broken down by breaking the bonds between individual sugar units. The reaction breaks a glycosidic bond as water is added to the compound. The...
Formation of Halohydrin from Alkenes
Cohesion
On a surface,...
Curing Methods

