Predicting the settling velocity of flocs formed in water treatment using multiple fractal dimensions

Here we introduce a distribution of floc fractal dimensions as opposed to a single fractal dimension value into the floc settling velocity model developed in earlier studies. The distribution of fractal dimensions for a single floc size was assumed to cover a range from 1.9 to 3.0. This range was selected based on the theoretically determined fractal dimensions for diffusion-limited and cluster-cluster aggregation. These two aggregation mechanisms are involved in the formation of the lime softening flocs analyzed in this study. Fractal dimensions were generated under the assumption that a floc can have any value of normally distributed fractal dimensions ranging from 1.9-3.0. A range of settling velocities for a single floc size was calculated based on the distribution of fractal dimensions. The assumption of multiple fractal dimensions for a single floc size resulted in a non-unique relationship between the floc size and the floc settling velocity, i.e., several different settling velocities were calculated for one floc size. The settling velocities calculated according to the model ranged from 0 to 10 mm/s (average 2.22 mm/s) for the majority of flocs in the size range of 1-250 μm (average 125 μm). The experimentally measured settling velocities of flocs ranged from 0.1 to 7.1 mm/s (average 2.37 mm/s) for the flocs with equivalent diameters from 10 μm to 260 μm (average 124 μm). Experimentally determined floc settling velocities were predicted well by the floc settling model incorporating distributions of floc fractal dimensions calculated based on the knowledge of the mechanisms of aggregation, i.e., cluster-cluster aggregation and diffusion-limited aggregation.