Characterization of MgNd2 alloy for potential applications in bioresorbable implantable devices

The aim of this study is to investigate and demonstrate the mechanical and corrosive characteristics of the neodymium-containing magnesium alloy MgNd2 (Nd2), which can be used as a resorbable implant material, especially in the field of stenting applications. To determine the mechanical characteristics of Nd2, tensile and compression tests were initially carried out in the hot extruded state. Here a unique elongation ratio (~30%) of the alloy could be observed. Subsequent T5 and T6 heat treatments were arranged to reveal their effect on the alloy's strengths and elongation values. The general degradation behaviour of Nd2 in a 0.9% NaCl solution was investigated by means of polarization curves and hydrogen evolution. In addition to this, by using various in vivo parameters, a corrosion environment was established to determine the alloy's degradation in vitro. Here, the mass loss per day in (MgF(2) and Bioglass)-coated and uncoated states and the corresponding maximum forces resulting from subsequent three-point bending tests revealed slow and steady corrosion behaviour. The cell viability and proliferation tests carried out on L-929 and MSC-P5 cells also showed good results. The mechanical and corrosive characteristics determined, as well as the in vitro test results obtained within the scope of this study, led to the development and successful in vivo testing of an MgF(2)-coated Nd2 mucosa stent which was introduced as an appropriate resorbable application.