Freeze-thaw stability of duck surimi-like materials with different cryoprotectants added

In this study, the effect of the addition of different cryoprotectants on the freeze-thaw stability of duck surimi-like material (DSLM) was tested. A 6% (wt/wt) low-sweetness cryoprotectant (i.e., polydextrose, trehalose, lactitol, or palatinit) was added to a 3-kg portion of DSLM, and the mixture was subjected to freeze-thaw cycles during 4 mo of frozen storage. The DSLM with no cryoprotectant added (control) and with a 6% sucrose-sorbitol blend (high-sweetness cryoprotectant) added also were tested. The polydextrose-added sample had the highest water-holding capacity among the sample types tested (P < 0.05), and it retained its higher value during frozen storage. The protein solubility of the cryoprotectant-added samples decreased significantly (P < 0.05) from 58.99 to 59.60% at initial frozen storage (0 mo) to 48.60 to 54.61% at the end of the experiment (4 mo). The gel breaking force of all samples significantly decreased (P < 0.05) at 1 mo; this breaking force then stabilized after further frozen storage for the cryoprotectant-added samples, whereas it continued to decrease in the control samples. Gel deformation fluctuated during frozen storage and was significantly lower (P < 0.05) at the end of experiment than at the beginning. The presence of cryoprotectants reduced the whiteness of DSLM. Samples containing polydextrose, trehalose, lactitol, and palatinit were able to retain the protein solubility, gel breaking force, and deformation of DSLM better than control samples after 4 mo of frozen storage and exposure to freeze-thaw cycles. The effects of these low-sweetness cryoprotectants are comparable to those of sucrose-sorbitol, thus, these sugars could be used as alternatives in protecting surimi-like materials during frozen storage.