A novel compact repetitive frequency voltage booster based on magnetic switches and Fitch generator

In this paper, a novel repetitive frequency voltage booster (named repetitive Fitch booster by the authors) based on magnetic switches and Fitch generators is proposed. The principle of operation is to charge capacitors in parallel when magnetic switches (MSs) are unsaturated and reverse voltage polarity of every other capacitor when MSs saturate. With the principle, circuit topology of a 4-stage repetitive Fitch booster (RFB) is presented. Simulation as well as experiment shows its feasibility in boosting voltage and compressing rise-time. In simulation, the input voltage of 100 V is boosted to 372 V, while test stand yields output voltage with frequency of 1 kHz, amplitude of 19 kV with each capacitor charged to about 5.6 kV, and rise-time compression from 7.3 μs to 700 ns. Meanwhile, calculations show that the 4-stage RFB effectively reduces core volume by about half, from 1093.5 cm(3) to 585.2 cm(3). Furthermore, design rules are proposed so that topologies of RFBs with stages other than four can be conveniently derived. As an example, an 8-stage RFB is proposed and verified with circuit simulation, which shows an output voltage of 759 V with the input voltage of 100 V.