Establishing end-to-end security in a nationwide network for telecooperation

Martin Staemmler1, Michael Walz, Gerald Weisser

  • 1University of Applied Sciences, Stralsund, Germany. martin.staemmler@fh-stralsund.de

Related Concept Videos

Pilot and Numeric Relaying01:21

Pilot and Numeric Relaying

Pilot relaying is a type of differential protection used in power systems. It compares electrical quantities at the terminals of equipment via a communication channel instead of direct relay interconnection. This method is essential for transmission lines where the terminals are far apart, typically up to 80 km for lines with 69 to 115 kV ratings. Four types of communication channels are used for pilot relaying:
Zones of Protection01:16

Zones of Protection

In power systems, the entire setup is divided into protective zones to isolate faults and protect the rest of the network. These zones include generators, transformers, buses, transmission lines, distribution lines, and motors. Each zone can be visualized as a separate room in a house, with each room protected by its own circuit breaker.
Protective zones are defined by closed dashed lines, containing one or more components. A key characteristic of these zones is the strategic placement of...
Introduction to Global Positioning System01:30

Introduction to Global Positioning System

The Global Positioning System (GPS) revolutionized positioning on Earth, providing precise location data through satellite ranging. The GPS system was developed in 1978 by the U.S. Department of Defense  for military use, and it became available for civilian applications in 1983, transforming fields including navigation, fleet management, and time synchronization for telecommunications systems.GPS consists of satellites in medium Earth orbit, about 20,200 kilometers above the surface,...