Related Experiment Video
Updated: Jun 21, 2026

Removal of Trace Elements by Cupric Oxide Nanoparticles from Uranium In Situ Recovery Bleed Water and Its Effect on Cell Viability
Published on: June 20, 2015
Effects of nano-copper(II) oxide and nanomagnesium oxide particles on activated sludge
1Department of Civil, Architectural and Environmental Engineering, Missouri University of Science and Technology, Rolla, MO 65409, USA.
Abstract:
Effects of nano-copper(II) oxide (nano-CuO) and nanomagnesium oxide (nano-MgO) particles on activated sludge endogenous respiration (aerobic digestion), biochemical oxygen demand (BOD) biodegradation, and nitrification were investigated through respiration rate measurement. For comparison, the effects of Cu(II) and Mg(II) ions on activated sludge were also studied. Results indicated that soluble Cu(II) has half maximum inhibitory concentration (IC50) values of 19, 5.5, 53, and 117 mg Cu/L for endogenous respiration, BOD biodegradation, ammonium oxidation, and nitrite oxidation, respectively. However, nano-CuO only inhibited BOD biodegradation at 240 mg Cu/L or more, and its associated toxicity was primarily caused by soluble Cu(II). In contrast, soluble Mg(II) was not toxic to activated sludge in the experimental concentration range, but nano-MgO inhibited BOD biodegradation and nitrification with IC50 values of 70 and 143 mg Mg/L, respectively. Further study indicated that the toxicity of nano-MgO resulted primarily from increased pH following MgO hydrolysis.
Related Concept Videos
Microbial Leaching
Microbial Corrosion

