Related Experiment Video
Updated: May 19, 2026
Preparation of Biomass-based Mesoporous Carbon with Higher Nitrogen-/Oxygen-chelating Adsorption for Cu(II) Through Microwave Pre-Pyrolysis
Published on: February 12, 2019
Polyethyleneimine functionalized protonated titanate nanotubes as superior carbon dioxide adsorbents
Jie Liu1, Yue Liu, Zhongbiao Wu
1Department of Environmental Engineering, Zhejiang University, Hangzhou 310058, PR China.
Abstract:
In this paper, protonated titanate nanotubes (PTNTs) were modified with polyethyleneimine (PEI) by wet impregnation method for CO(2) adsorption. Their micro-morphology and structural properties were characterized by a range of analytical techniques, including XRD, TEM, SEM, N(2) adsorption etc. Experimental results revealed that the functionalized PTNTs with 50 wt.% PEI loaded exhibited a high CO(2) adsorption capacity of 130.8 mg/g-sorbent at 100°C. Only a minor loss of its capacity was observed after five consecutive adsorption-desorption runs. The PEI was existed both in the internal and external mesoporous pores of PTNTs via chemical combination between amino group and enriched protons, which accounted for their good thermal stability at elevated temperatures. The results present herein imply that the PEI modified PTNTs could be appealing materials for capturing CO(2) from power plant flue gas.
