Related Experiment Video
Updated: May 18, 2026

Extraction of Structural Extracellular Polymeric Substances from Aerobic Granular Sludge
Published on: September 26, 2016
A novel method of sludge pretreatment using the combination of alkalis
J Rajesh Banu1, Uan Do Khac, S Adish Kumar
1Department of Civil Engineering, Anna University of Technology, Tirunelveli-627007, India.
Abstract:
The present study aims to utilise the advantage of higher sludge solubilisation potential of sodium hydroxide (NaOH) and sludge management properties of lime to achieve sludge pretreatment and its subsequent management. The optimum dosage and time required for sludge pretreatment using NaOH was found to be 1.6 g l(-1) and 3 hr, respectively. At the optimized condition, lime was added at varying concentration (0.3 to 1.6 g l(-1)) to study its effect on capillary suction time, soluble chemical oxygen demand (SCOD) release and total phosphorous (TP) removal. A lime dosage of 0.7g l(-1) was found to be beneficial for soluble chemical oxygen demand (COD) release. When compared to control, the combination of alkalis (NaOH and lime) reduced the TP and capillary suction time (CST) in the supernatant of the sludge. The TP removal was from 100 to 40 mg l(-1) and CST reduction was from 1360 to 350 sec, respectively. The combined alkali pretreatment not only prevent the subsequent TP increase in the effluent, but also decreased the time to filter the sludge, thus makes the digested sludge easier to manage.
Related Concept Videos
Coagulation
Preparation of Amines: Alkylation of Ammonia and Amines
Each alkylation step makes the nitrogen center more nucleophilic, which triggers successive alkylations until a quaternary ammonium salt is formed. Considering...
Microbial Bioremediation of Hydrocarbons
Production of Organic Acids
Reduction of Alkynes to trans-Alkenes: Sodium in Liquid Ammonia
When dissolved in liquid ammonia, an alkali metal, such as sodium, dissociates into a...

