Study on arsenic level in public water supply of Delhi using hydride generator accessory coupled with atomic...

Exposure to arsenic has been associated with several health hazards. Worldwide the main reason for chronic human intoxication with arsenic is intake of contaminated drinking water. Air acetylene type of atomic absorption spectrophotometer in combination with hydride generator accessory was used to analyze arsenic level in 25 water samples collected from 25 booster pumping stations and 313 water samples collected from tap water supply of 62 areas of Delhi. Results were analyzed using SPSS and Barlett's Chi Square Test. Mean arsenic level detected in water samples collected from booster pumping stations was 0.00976 ppm (Range 0.000-0.017 ppm, Standard Deviation 0.006 and Standard error of Mean 0.00118). Maximum arsenic level (0.017 ppm) was found in water samples of booster pumping stations of Mehrauli, Punjabi Bagh and Ramjas Road. Mean arsenic level detected in samples collected from tap water supply was 0.013 ppm (Range 0-0.0430 ppm, Standard Deviation 0.00911 and Standard error of Mean 0.000515). In water samples of 42 areas arsenic level detected was exceeding WHO/EPA permissible limit of 0.01 ppm (10 ppb). The mean arsenic level detected in water samples of booster pumping station was within WHO/EPA permissible limit while mean arsenic level detected in tap water samples was marginally higher. Mixing of ground water and contamination through broken or leaking channel could be the possible reason of higher arsenic level in tap water. Continuous monitoring of quality of drinking water is required particularly in view of water contamination caused by industrial waste and uncontrolled ground water extraction.