Direct tri-constituent co-assembly of highly ordered mesoporous carbon counter electrode for dye-sensitized solar...

Controlling over ordered porosity by self-assembly is challenging in the area of materials science. Materials with highly ordered aperture are favorable candidates in catalysis and energy conversion device. Here we describe a facile process to synthesize highly ordered mesoporous carbon (OMC) by direct tri-constituent co-assembly method, which uses resols as the carbon precursor, tri-block copolymer F127 as the soft template and tetraethoxysilane (TEOS) as the inorganic precursor. The obtained products are characterized by small-angle X-ray diffraction (SAXD), Brunauer-Emmett-Teller (BET) nitrogen sorption-desorption measurement and transmission electron microscope (TEM). The results indicate that the OMC possesses high surface areas of 1209 m(2) g(-1), homogeneous pore size of 4.6 nm and a large pore volume of 1.65 cm(3) g(-1). The advantages of high electrochemical active surface area and favorable accessible porosity of OMC benefit the catalysis of I(3)(-) to I(-). As a result, the OMC counter electrode displays a remarkable property when it was applied in dye-sensitized solar cells (DSSCs). For comparison, carbon black (CB) counter electrode and Pt counter electrode have also been prepared. When these different counter electrodes were applied for dye-sensitized solar cells (DSSCs), the power-conversion efficiency (η) of the DSSCs with CB counter electrode are measured to be 5.10%, whereas the corresponding values is 6.39% for the DSSC with OMC counter electrode, which is comparable to 6.84% of the cell with Pt counter electrode under the same experimental conditions.