Quantification of Cryptosporidium parvum in natural soil matrices and soil solutions using qPCR

Traditional microscopy methods for the detection and quantification of Cryptosporidium parvum in soil matrices are time-consuming, labor-intensive, and lack sensitivity and specificity. This research focused on developing a qPCR protocol for the sensitive and specific detection and quantification of C. parvum in natural soil matrices and soil-water extracts. The physico-chemical parameters - lysis media, number of thermal shocks and thawing temperatures - controlling DNA extraction efficiency were investigated. Experimental results identified oocyst age as a critical parameter affecting oocyst disruption and quantification. The most efficient oocyst disruption method for C. parvum oocysts regardless of their age was established as 5 thermal shocks with thawing at 65°C in Tris-EDTA (TE) buffer. In addition to the purification columns used to remove PCR inhibitors present in environmental matrices, a combination of 3mM MgCl(2) and 600ng/μl BSA yielded the highest amplicon yield for both young and aged oocysts. Sucrose flotation was determined to be a better oocyst isolation method than two-phase flotation. The optimized parameters for DNA extraction and the qPCR assay resulted in very specific and sensitive detection of C. parvum. Minimum detection limits were 0.667 for young C. parvum oocysts and 6.67 for aged C. parvum oocysts per PCR reaction. The accuracy of the detections and quantifications was 0.999. Protocol performance was tested in contrasting soil samples and soil-water extract samples on the basis of percentage of recovery (PR) values. Depending on the number of oocysts used to inoculate the samples, the average PR values ranged from 7.2 to 43.5%, 29.3-52.5%, and 11.5-60.8% for Trenton, Greenson, and Sparta soil-water extracts, respectively, and 12.1-77% for DI water. PR values ranged from 4.3% to 107.8% for Trenton, Greenson and Sparta soil samples.