Related Experiment Video
Updated: May 16, 2026

Determination of the Friction Coefficients of Icy Pavements Under Different Amounts of Snowfall
Published on: January 6, 2023
Laboratory analysis of the infiltration capacity of interlocking concrete block pavements in car parks
Luis A Sañudo-Fontaneda1, Jorge Rodriguez-Hernandez, Angel Vega-Zamanillo
1Construction Technology Research Group (GITECO), Dept of Transport, Project and Process Technology, ETSICCP, Universidad de Cantabria, 39005 Santander, Spain. sanudola@unican.es
Abstract:
Interlocking concrete block pavements (ICBPs) have been widely used in car parks to reduce runoff. Researches have demonstrated that clogging is the most influential factor in the reduction of the infiltration capacity of this type of permeable pavement. Nevertheless, there is no laboratory study of the infiltration performance of ICBPs that combines clogging levels with variables related with the topography of car parks such as runoff surface length (R(SL)) and surface slope (S(S)). This paper studies the infiltration behaviour of ICBP during their operational life in a car park using an improved version of the Cantabrian Fixed (CF) Infiltrometer. This laboratory device simulates direct rainfall and runoff from adjacent impervious areas over an ICBPs surface of 0.25 m(2) for different slopes (0, 3, 5, 7 and 10%) and three scenarios of clogging (surface newly built, surface clogged and surface clogged with maintenance). This paper presents the results of the tests and a statistical analysis based on three regression models (corresponding to each clogging scenario) depending on the R(SL) and S(S) variables. All models passed a confidence level of 95%, presenting high R(2) values and showing that R(SL) is a more influential variable than the S(S) for all clogging scenarios.
More Related Videos
05:38Production and Analysis of Sporosarcina pasteurii Biocement Bricks Using Custom 3D-Printed Molds for Unconfined Compression Tests
Published on: March 7, 2025
06:27Expression of Cementitious Pore Solution and the Analysis of Its Chemical Composition and Resistivity Using X-ray Fluorescence
Published on: September 23, 2018
Related Concept Videos
Design Example: Joints in Concrete Pavements
Contraction joints are typically formed by sawing a groove into the concrete shortly after it has hardened. This creates a weakened vertical plane, deliberately encouraging cracking at...
Permeability of Concrete
Abrasion Resistance of Concrete
One such test is the revolving disc test, where three plates...
Measurement of Air Content in Concrete
The pressure method,...
Masonry Paving
Workability of Concrete
Concrete's workability is determined by its resistance to internal forces that arise when...