Related Experiment Video
Updated: May 16, 2026

A Modified QuEChERS-HPLC Method for Detection of Polycyclic Aromatic Hydrocarbons in Zebrafish Embryos Exposed to Fine Particulate Matter
Published on: June 13, 2025
PDMS extraction bars for the determination of volatile aromatic hydrocarbons in water and wastewater
Daiane S da Silva1, Carla G B Brenner, Francieli M Mayer
1Chemistry Department, Federal University of Santa Maria, RS, Brazil.
Abstract:
In this study, the preparation and application of extraction bars of PDMS were investigated to preconcentrate and determine benzene, toluene, ethylbenzene, and xylene in water and wastewater by means of HPLC with fluorescence detection. Aliquot samples from hospital wastewater were used as the model effluent. The independent variables for the sorptive extraction were as follows: ionic strength (added amounts of NaCl); pH; temperature and time of absorption; temperature and time of desorption. Under optimized conditions, by using a factorial design, the suspended extraction bars could allow the determination of benzene, toluene, ethylbenzene, and xylene (1.20 ± 0.05 μg/L; 10.40 ± 0.02 μg/L; 1.80 ± 0.04 μg/L; 15.9 ± 0.04 μg/L, respectively) in hospital effluent (fortified samples), by recoveries of 71.9 ± 4.9 to 74.8 ± 5.6%. This procedure represents an innovation that eliminates the time-consuming stage of vacuum microfiltration, and allows the determination of volatile organic compounds by HPLC. As far as we know, this procedure is original and represents an important contribution to the field.
More Related Videos
Related Concept Videos
Gas Chromatography: Types of Detectors-II
Sampling Methods: Sample Types
Solid samples include a variety of substances, such as sediments from water bodies, soil, metals, and biological tissues. Two standard methods for extracting sediments from water bodies are grab sampling and piston coring. Grab sampling involves using a device to collect a discrete sediment sample from the bottom of a water body with minimal disturbance. Grab samples do not always represent the entire area due to...

