Related Experiment Video
Updated: May 16, 2026
Shrinkage of Dental Composite in Simulated Cavity Measured with Digital Image Correlation
Published on: July 21, 2014
Effect of energy density on low-shrinkage composite resins: diode-pumped solid state laser versus
Young-Joon Heo1, Geun-Ho Lee, Jeong-Kil Park
1Department of Dental Materials, School of Dentistry and Medical Research Institute, Pusan National University, Yangsan, Korea.
Objective:
The purpose of the present study was to evaluate the effect of energy density on the polymerization of low-shrinkage composite resins.
Background Data:
The number of photons needs to initiate the polymerization process can be controlled by light intensity and curing time through the form of energy density.
Materials And Methods:
For the study, two methacrylate-based (Premise [PR] and Venus Diamond [VE]) and one silorane-based (Filtek LS [LS]) composite resins were light cured using a quartz-tungsten-halogen (QTH) light-curing unit (LCU) and a 473 nm diode-pumped solid state (DPSS) laser. Degree of conversion (DC), microhardness, refractive index, and polymerization shrinkage were evaluated under different energy densities. Through the study, the feasibility of DPSS laser as a light source was tested as well.
Results:
LS showed the highest DC and refractive index both on the top and bottom surfaces, and the least polymerization shrinkage among the tested specimens. For the same or similar energy density, QTH and DPSS showed insignificant DC difference (p>0.05). On the other hand, for microhardness, except for one case at the bottom surface, QTH and DPSS showed significant difference (p<0.001). DPSS generated slightly lower polymerization shrinkage than that by QTH.
Conclusions:
DC, microhardness, refractive index, and polymerization shrinkage were linearly correlated with energy density. In most cases, there was a strong linear correlation among DC, mirohardness, and refractive index. The DPSS laser of 473 nm could polymerize low-shrinkage composite resins to the level that was achieved by the conventional QTH unit.
