Related Experiment Video

Updated: May 15, 2026

A Novel Inhalation Mask System to Deliver High Concentrations of Nitric Oxide Gas in Spontaneously Breathing Subjects

A Novel Inhalation Mask System to Deliver High Concentrations of Nitric Oxide Gas in Spontaneously Breathing Subjects

Published on: May 4, 2021

High-efficiency generation and delivery of aerosols through nasal cannula during noninvasive ventilation

P Worth Longest¹, Ross L Walenga, Yoen-Ju Son

¹1 Department of Mechanical and Nuclear Engineering, Virginia Commonwealth University , Richmond, VA 23284.

Journal of Aerosol Medicine and Pulmonary Drug Delivery

|January 1, 2013

Abstract

Background:

Previous studies have demonstrated the delivery of pharmaceutical aerosols through nasal cannula and the feasibility of enhanced condensational growth (ECG) with a nasal interface. The objectives of this study were to develop a device for generating submicrometer aerosols with minimal depositional loss in the formation process and to improve aerosol delivery efficiencies through nasal cannulas.

Methods:

A combination of in vitro experiments and computational fluid dynamics (CFD) simulations that used the strengths of each method was applied. Aerosols were formed using a conventional mesh nebulizer, mixed with ventilation gas, and heated to produce submicrometer sizes. An improved version of the mixer and heater unit was developed based on CFD simulations, and performance was verified with experiments. Aerosol delivery was considered through a commercial large-bore adult cannula, a divided (D) design for use with ECG, and a divided and streamlined (DS) design.

Results:

The improved mixer design reduced the total deposition fraction (DF) of drug within the mixer by a factor of 3 compared with an initial version, had a total DF of approximately 10%, and produced submicrometer aerosols at flow rates of 10 and 15 L/min. Compared with the commercial and D designs for submicrometer aerosols, the DS cannula reduced depositional losses by a factor of 2-3 and retained only approximately 5% or less of the nebulized dose at all flow rates considered. For conventional-sized aerosols (3.9 and 4.7 μm), the DS device provided delivery efficiencies of approximately 80% and above at flow rates of 2-15 L/min.

Conclusions:

Submicrometer aerosols can be formed using a conventional mesh nebulizer and delivered through a nasal cannula with total delivery efficiencies of 80-90%. Streamlining the nasal cannula significantly improved the delivery efficiency of both submicrometer and micrometer aerosols; however, use of submicrometer particles with ECG delivery resulted in overall lower depositional losses.

More Related Videos

Intranasal Delivery of mRNA Polyplexes via Rayleigh Breakup Aerosols: An In Vitro Method for Nasal Deposition and Functional Testing

Intranasal Delivery of mRNA Polyplexes via Rayleigh Breakup Aerosols: An In Vitro Method for Nasal Deposition and Functional Testing

Published on: January 20, 2026

Dry Powder and Nebulized Aerosol Inhalation of Pharmaceuticals Delivered to Mice Using a Nose-only Exposure System

Dry Powder and Nebulized Aerosol Inhalation of Pharmaceuticals Delivered to Mice Using a Nose-only Exposure System

Published on: April 6, 2017

Related Concept Videos

Administering Oxygen by Nasal Cannula

Administering Oxygen by Nasal Cannula

Oxygen therapy is critical to patient care, especially for those struggling with respiratory issues. This intervention increases the oxygen concentration in the lungs, enhancing the amount of oxygen transported to the body's tissues. One standard method of delivering supplemental oxygen is through a nasal cannula, a non-invasive device that provides low to medium oxygen concentrations.
Nasal Cannulas
A nasal cannula is a lightweight tube split into two prongs placed in the nostrils, connected...

Oxygen Delivering System I: Nasal Cannula and Face Mask

Oxygen Delivering System I: Nasal Cannula and Face Mask

The human body requires oxygen to function, and when the natural process of respiration is hindered, external devices, including the following, are needed to help deliver this vital gas.
Nasal Cannula
A nasal cannula is a lightweight tube split at one end into two prongs and placed in the nostrils. It is typically used to deliver low to medium levels of oxygen.
Suggested flow rate: The suggested flow rate for a nasal cannula typically ranges between 1 and 6 L/min.
Oxygen percentage setting:...

Mechanical Ventilation III: Noninvasive Ventilation

Mechanical Ventilation III: Noninvasive Ventilation

Noninvasive positive-pressure ventilation (NIPPV), continuous positive airway pressure (CPAP), and bilevel positive airway pressure (BiPAP) are essential methods in respiratory care. These ventilation techniques offer unique benefits for patients with various respiratory conditions, providing adequate support without requiring intubation. Let's explore how each method is crucial in improving patient outcomes and enhancing respiratory therapy.
Noninvasive Positive-Pressure Ventilation (NIPPV)

Mechanical Ventilation II: Invasive Ventilation

Mechanical Ventilation II: Invasive Ventilation

Ventilators are essential medical equipment used to aid patients with respiratory difficulties. Their primary function is to assist or replace spontaneous breathing by providing mechanical ventilation. There are two general classes of mechanical ventilators: negative-pressure and positive-pressure ventilators.
Negative-Pressure Ventilators
Negative-pressure ventilators create a vacuum around the chest or body to draw air into the lungs, simulating breathing. This method does not require an...

Oxygen Delivering System II: Venturi Mask and Transtracheal Oxygen

Oxygen Delivering System II: Venturi Mask and Transtracheal Oxygen

Oxygen therapy is a pivotal aspect of medical care, particularly for patients with respiratory ailments. Two prominent oxygen-delivering systems include the Venturi mask and the transtracheal oxygen catheter.
Venturi Mask
The Venturi mask, named after the Venturi effect, is designed to deliver precise oxygen concentrations. It consists of a large tube with an oxygen inlet that narrows down, causing a pressure drop that pulls air in through adjustable side ports. The mask is a lightweight,...

Ventilatory Modes

Ventilatory Modes

Mechanical ventilators are life-saving devices that support or replace spontaneous breathing. They deliver breaths to patients through varying methods known as ventilator modes. Understanding these modes is critical for healthcare providers managing patients with respiratory failure.
There are three ventilatory modes: full support, partial support, and spontaneous. These are described below.
Full Support Modes
Full support modes include controlled mechanical ventilation, continuous mandatory...

Articles linked to this work by shared authors, journal, and citation graph.

Transnasal Administration of Surfactant Aerosol to the Lungs of Infants Using Direct Interfaces - Lessons Learned from Computational Fluid Dynamics.

Pharmaceutical research·2026

Real-time single-particle imaging of functional lungs reveals mosaic-like patterns of aerosol deposition in alveoli.

Nature biomedical engineering·2026

Development of a New Aerosol Delivery System for Administering Aerosol Surfactant Therapy to Preterm Infants Through a Laryngeal Mask Airway.

AAPS PharmSciTech·2026

Regional Nasal Drug Deposition in Pediatric vs. Adult Models: In vitro Insights into User Technique and Breathing Patterns Sensitivity.

Pharmaceutical research·2026

Rapid and Efficient Aerosol Delivery During 60 L/min High Flow Nasal Cannula Therapy-In Vitro Development of a Novel Dry Powder Delivery Platform.

AAPS PharmSciTech·2026

Mosaic pattern: lung functional heterogeneity at the alveolus level.

bioRxiv : the preprint server for biology·2025

See all related articles