Related Experiment Video

Updated: May 15, 2026

Morphology Control for Fully Printable Organic–Inorganic Bulk-heterojunction Solar Cells Based on a Ti-alkoxide and Semiconducting Polymer
08:29

Morphology Control for Fully Printable Organic–Inorganic Bulk-heterojunction Solar Cells Based on a Ti-alkoxide and Semiconducting Polymer

Published on: January 10, 2017

Effects of impurities on operational mechanism of organic bulk heterojunction solar cells

Loren Kaake1, Xuan-Dung Dang, Wei Lin Leong

  • 1Center for Polymers and Organic Solids, University of California at Santa Barbara, Santa Barbara, CA 93106, USA.

Advanced Materials (Deerfield Beach, Fla.)
|January 3, 2013
PubMed

More Related Videos

Printing Fabrication of Bulk Heterojunction Solar Cells and In Situ Morphology Characterization07:32

Printing Fabrication of Bulk Heterojunction Solar Cells and In Situ Morphology Characterization

Published on: January 29, 2017

A 3D-printed Chamber for Organic Optoelectronic Device Degradation Testing08:29

A 3D-printed Chamber for Organic Optoelectronic Device Degradation Testing

Published on: August 10, 2018

Related Concept Videos

P-N junction01:11

P-N junction

A p-n junction is formed when p-type and n-type semiconductor materials are joined together. At the interface of the p-n junction, holes from the p-side and electrons from the n-side begin to diffuse into the opposite sides due to the concentration gradient. This diffusion of carriers leads to a region around the junction where there are no free charge carriers, known as the depletion region. The charge density within the depletion region for the n-side and p-side can be described by the...