Related Experiment Video
Updated: May 15, 2026

Three-Dimensionally Printed Microfluidic Cross-flow System for Ultrafiltration/Nanofiltration Membrane Performance Testing
Published on: February 13, 2016
Characterisation of RO fouling in an integrated MBR/RO system for wastewater reuse
Abstract:
Membrane filtration has gradually gained acceptance as the preferred pre-treatment for reverse osmosis (RO). In this paper, an integrated membrane bioreactor (MBR)/RO system for wastewater reuse treating real sewage water has been evaluated and the RO fouling has been characterised. The MBR achieved low values of organic matter, total nitrogen, PO(4)(3-), total organic carbon, turbidity and conductivity. Filtration with two different RO commercial membranes was performed after the MBR pre-treatment and the same average fouling rate (0.08 bar day(-1)) was noted. These results gained from the characterisation of the high quality MBR/RO permeate show its potential for water reuse. Inorganic precipitation appears to be the predominant form of fouling in the RO membranes. Calcium phosphate and alumino-silicates were identified by a scanning electron microscope combined with an energy dispersive X-ray and polysaccharides, amide and aliphatic structures were detected with attenuated total reflection infrared microspectroscopy.
Related Concept Videos
Bioreactor Design and Operational System
Bioreactor Controls-II
Microbial Corrosion
Environmental Applications of Microorganisms
Bioreactor Controls-I
Bioremediation
