Internal detection of surface plasmon coupled chemiluminescence during chlorination of potassium thin films

The interaction of chlorine with potassium surfaces is a prototype reaction with a strong non-adiabatic energy transfer leading to exoemission and chemiluminescence. Thin film K/Ag/p-Si(111) Schottky diodes with 8 nm potassium on a 5-200 nm thick Ag layer are used as 2π-photodetectors for the chemiluminescence during chlorination of the K film at 110 K. The observed photocurrent shows a sharp maximum for small exposures and decreases gradually with the increasing chloride layer. The time dependence can be explained by the reaction kinetics, which is governed initially by second-order adsorption processes followed by an electric field-assisted diffusion. The detector current corresponds to a yield of a few percent of elementary charge per reacting chlorine molecule and is orders of magnitude larger than for external detection. The photoyield can be enhanced by increasing the Ag film thickness. For Ag films of 30 and 50 nm, the yield exhibits a maximum indicating surface plasmon coupled chemiluminescence. Surface plasmon polaritons in the Ag layer are excited by the reaction and decay radiatively into Si leading to the observed currents. A model calculation for the reverse process in attenuated total reflection is applied to explain the observed current yield maxima.