Related Experiment Video
Updated: May 14, 2026

Fast Pyrolysis of Biomass Residues in a Twin-screw Mixing Reactor
Published on: September 9, 2016
Characterisation of spruce, salix, miscanthus and wheat straw for pyrolysis applications
Eoin Butler1, Ger Devlin, Dietrich Meier
1Bioresources Research Centre, Biosystems Engineering, UCD School of Biosystems, Belfield, Dublin 4, Ireland. eoin.butler@ucd.ie
Abstract:
This research details the characterisation of four Irish-grown lignocellulosic biomasses for pyrolysis by biomass composition analysis, TGA, and Py-GC/MS-FID. Ash content (mf) increased in the order spruce (0.26 wt.%) < salix (1.16 wt.%) < miscanthus (3.43 wt.%) < wheat straw (3.76 wt.%). Analysis of hydrolysis-derived sugar monomers showed that xylose concentrations (4.69–26.76 wt.%) ranged significantly compared to glucose concentrations (40.98–49.82 wt.%). Higher hemicellulose and ash contents probably increased non-volatile matter, and decreased the temperature of maximum degradation by TGA as well as yields of GC-detectable compounds by Py-GC/MS-FID. Differences in composition and degradation were reflected in the pyrolysate composition by lower quantities of sugars (principally levoglucosan), pyrans, and furans for salix, miscanthus, and wheat straw compared to spruce, and increased concentrations of cyclopentenones and acids.
More Related Videos
09:46Reducing Willow Wood Fuel Emission by Low Temperature Microwave Assisted Hydrothermal Carbonization
Published on: May 19, 2019
11:44Qualitative Characterization of the Aqueous Fraction from Hydrothermal Liquefaction of Algae Using 2D Gas Chromatography with Time-of-flight Mass Spectrometry
Published on: March 6, 2016