Related Experiment Video
Updated: May 14, 2026

Flame Experiments at the Advanced Light Source: New Insights into Soot Formation Processes
Published on: May 26, 2014
Atmospheric measurements of the physical evolution of aircraft exhaust plumes
M T Timko1, E Fortner, J Franklin
1Aerodyne Research, Inc, 45 Manning Road, Billerica Massachusetts 01821, United States.
Abstract:
Drawing from a series of field measurement activities including the Alternative Aviation Fuels Experiments (AAFEX1 and AAFEX2), we present experimental measurements of particle number, size, and composition-resolved mass that describe the physical and chemical evolution of aircraft exhaust plumes on the time scale of 5 s to 2-3 min. As the plume ages, the particle number emission index initially increases by a factor of 10-50, due to gas-to-particle formation of a nucleation/growth mode, and then begins to fall with increased aging. Increasing the fuel sulfur content causes the initial increase to occur more rapidly. The contribution of the nucleation/growth mode to the overall particle number density is most pronounced at idle power and decreases with increasing engine power. Increasing fuel sulfur content, but not fuel aromatic content causes the nucleation/growth mode to dominate the particle number emissions at higher powers than for a fuel with "normal" sulfur and aromatic content. Particle size measurements indicate that the observed particle number emissions trends are due to continuing gas-to-particle conversion and coagulation growth of the nucleation/growth mode particles, processes which simultaneously increase particle mass and reduce particle number density. Measurements of nucleation/growth mode mass are consistent with the interpretation of particle number and size data and suggest that engine exit plane measurements may underestimate the total particle mass by as much as a factor of between 5 and 10.
More Related Videos
08:59Measuring Sub-23 Nanometer Real Driving Particle Number Emissions Using the Portable DownToTen Sampling System
Published on: May 22, 2020
07:24Combustion Chemistry of Fuels: Quantitative Speciation Data Obtained from an Atmospheric High-temperature Flow Reactor with Coupled Molecular-beam Mass Spectrometer
Published on: February 19, 2018
Related Concept Videos
Flame Photometry: Overview
Atomic Emission Spectroscopy: Instrumentation
Atomic Emission Spectroscopy: Lab
Inductively Coupled Plasma Atomic Emission Spectroscopy: Instrumentation
There are three main types of inductively coupled plasma atomic emission spectroscopy (ICP-AES) instruments: sequential, simultaneous multichannel, and Fourier transform instruments, with the latter being less commonly used.
Variation of Atmospheric Pressure
Assuming the air temperature is constant at a given altitude and that the ideal gas law of thermodynamics describes the atmosphere to a good approximation, one can find the variation of atmospheric pressure with height.
Let p(y) be the atmospheric pressure at...
Bernoulli's Principle: Applications
Entrainment devices use a high fluid speed to create low pressures and, thus, entrain one fluid into another. Some examples of these devices are given below: