Investigation of the correlation between the different mechanical properties of resin composites

The aim of this study was to investigate the relationship between the different mechanical properties with the filler fraction of various resin composites. Mechanical properties of eighteen different resin composites were investigated in this study; flexural strength (FS), flexural modulus (FM), fracture toughness (FT), compressive strength (CS), diametral tensile strength (DTS), Barcol hardness (BH), Vickers hardness (HV), and Knoop hardness (HK). The mean values of mechanical properties and the filler fractions (V(f )) obtained from the literature and the manufacturer were analyzed using Pearson's correlation test at p<0.01. The relationships were compared with the data retrieved from previous studies. Strong correlations between Vf and BH/HV/HK and V(f) and FM were evident in the results of the present study and these results were supported by the retrieved data from previous studies. The other relationships between mechanical properties, such as that between FS and FM and between CS and HV were not significant.