Stability of the hydrophilic and superhydrophobic properties of oxygen plasma-treated poly(tetrafluoroethylene) surfaces

Poly(tetrafluoroethylene) (PTFE) materials were exposed to low and high-energy oxygen plasma, and the stability of the materials' surface was evaluated using contact angle, surface roughness, and surface chemistry characterizations. Lower-energy oxygen plasma treatments exhibited hydrophilic behavior with contact angles as low as 87°, and the higher-energy oxygen plasma treatments exhibited superhydrophobic behavior with contact angles as high as 151°. The wettability of all the treated samples as stored in air and in water was found to be stable in time as evidenced by the statistically insignificant differences in the advancing, receding, and hysteresis contact angles. Low contact angle hysteresis (θH<5°) and low sliding angle (α≈4°) were exhibited by the superhydrophobic surface. The surface morphology was found to be responsible for the changes in the wettability of the PTFE samples since (1) there was an increase in the surface rms roughness as the plasma discharge energy was increased, and (2) there were no significant changes in the observed group frequencies of the FT-IR spectra of the treated PTFE from the untreated PTFE.