Related Experiment Video
Updated: May 14, 2026
Quantification of Heavy Metals and Other Inorganic Contaminants on the Productivity of Microalgae
Published on: July 10, 2015
Potential pre-concentration methods for Nannochloropsis gaditana and a comparative study of pre-concentrated sample
Sema Şirin1, Ester Clavero, Joan Salvadó
1Departament d'Enginyeria Química, Universitat Rovira i Virgili, 43007 Tarragona, Catalonia, Spain.
Abstract:
We compared potential pre-concentration techniques for Nannochloropsis gaditana (Nng) by testing natural sedimentation; flocculation with aluminium sulphate, polyaluminium chloride and chitosan; and induced pH. Promising flocculation efficiencies and concentration factors were obtained in a short time with alkalinity-induced flocculation at an adjusted pH of 9.7 and with chitosan at an adjusted pH of 9.9 using a concentration of 30mgL(-1). The sedimentation rates of alkalinity-induced flocculation were also evaluated. Additionally, viscosity, particle size distribution and Ca/Mg ions were analysed for pre-concentrated samples of N. gaditana (Nng) and the previously studied Phaeodactylum tricornutum (Pht) which were obtained by various different harvesting methods under optimal conditions. The rheological properties of the concentrated algae suspensions of two microalgal species showed Newtonian behaviour. The mean diameters of the flocs were between 39 and 48μm. The Ca/Mg analysis showed that Mg(+2) is the triggering ion for alkalinity-induced flocculation in the conditions studied.
