Related Experiment Video
Updated: May 13, 2026

Electrochemically and Bioelectrochemically Induced Ammonium Recovery
Published on: January 22, 2015
Saline catholytes as alternatives to phosphate buffers in microbial fuel cells
1Department of Civil & Environmental Engineering, Penn State University, 212 Sackett Building, University Park, PA 16802, USA.
Abstract:
Highly saline solutions were examined as alternatives to chemical buffers in microbial fuel cells (MFCs). The performance of two-chamber MFCs with different concentrations of saline solutions in the cathode chamber was compared to those with a buffered catholyte (50mM PBS). The use of a NaCl catholyte improved the CE to 43-60% (28% with no membrane) due to a reduction in oxygen transfer into the anolyte. The saline catholyte also reduced the membrane and solution resistance to 23Ω (41Ω without a membrane). The maximum power density of 491mW/m(2) (240mM NaCl) was only 17% less than the MFC with 50mM PBS. The decrease in power output with highest salinity was due to reduced proton transfer due to the ion exchange membrane, and pH changes in the two solutions. These results show that MFC performance can be improved by using a saline catholyte without pH control.
Related Concept Videos
Phosphate Buffer
Sodium dihydrogen phosphate does not fully dissociate in neutral or acidic solutions. When a strong base, such as sodium hydroxide (NaOH), is introduced into the solution, sodium dihydrogen phosphate...
Buffer Effectiveness
The buffer capacity is the amount of acid or base that can be added to a given volume...
Buffers: Overview
Potentiometry: Membrane Electrodes
Factors Affecting Solubility
Protein Buffers in Blood Plasma and Cells
Certain amino acids can exist in a zwitterion state at a...

