Related Experiment Video
Updated: May 13, 2026

Electric-field Control of Electronic States in WS2 Nanodevices by Electrolyte Gating
Published on: April 12, 2018
High performance amorphous ZnMgO/carbon nanotube composite thin-film transistors with a tunable threshold voltage
Xingqiang Liu1, Wei Liu, Xiangheng Xiao
1Department of Physics and Key Laboratory of Artificial Micro- and Nano-structures of Ministry of Education, Wuhan University, Wuhan 430072, China.
Abstract:
Here we report the fabrication and characterization of high mobility amorphous ZnMgO/single-walled carbon nanotube composite thin film transistors (TFTs) with a tunable threshold voltage. By controlling the ratio of MgO, ZnO and carbon nanotubes, high performance composite TFTs can be obtained with a field-effect mobility of up to 135 cm(2) V(-1) s(-1), a low threshold voltage of 1 V and a subthreshold swing as small as 200 mV per decade, making it a promising new solution-processed material for high performance functional circuits. A low voltage inverter is demonstrated with a functional frequency exceeding 5 kHz, which is only limited by parasitic capacitance rather than the intrinsic material speed. The overall device performance of the composite TFTs greatly surpasses not only that of the solution-processed TFTs, but also that of the conventional amorphous or polycrystalline silicon TFTs. It therefore has the potential to open up a new avenue to high-performance, solution-processed flexible electronics which could significantly impact the existing applications, and enable a whole new generation of flexible, wearable, or disposable electronics.
Related Concept Videos
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable quicker...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no current...

