Related Experiment Video
Updated: May 13, 2026

Procedure for the Transfer of Polymer Films Onto Porous Substrates with Minimized Defects
Published on: June 22, 2019
Transferred wrinkled Al2O3 for highly stretchable and transparent graphene-carbon nanotube transistors
Abstract:
Despite recent progress in producing transparent and bendable thin-film transistors using graphene and carbon nanotubes, the development of stretchable devices remains limited either by fragile inorganic oxides or polymer dielectrics with high leakage current. Here we report the fabrication of highly stretchable and transparent field-effect transistors combining graphene/single-walled carbon nanotube (SWCNT) electrodes and a SWCNT-network channel with a geometrically wrinkled inorganic dielectric layer. The wrinkled Al2O3 layer contained effective built-in air gaps with a small gate leakage current of 10(-13) A. The resulting devices exhibited an excellent on/off ratio of ~10(5), a high mobility of ~40 cm(2) V(-1) s(-1) and a low operating voltage of less than 1 V. Importantly, because of the wrinkled dielectric layer, the transistors retained performance under strains as high as 20% without appreciable leakage current increases or physical degradation. No significant performance loss was observed after stretching and releasing the devices for over 1,000 times. The sustainability and performance advances demonstrated here are promising for the adoption of stretchable electronics in a wide variety of future applications.
More Related Videos
11:09Scalable Solution-processed Fabrication Strategy for High-performance, Flexible, Transparent Electrodes with Embedded Metal Mesh
Published on: June 23, 2017
08:43Effect of Bending on the Electrical Characteristics of Flexible Organic Single Crystal-based Field-effect Transistors
Published on: November 7, 2016