Related Experiment Video
Updated: May 13, 2026

Platelet-Derived Extracellular Vesicle Functionalization of Ti Implants
Published on: August 5, 2021
Difficulties in removal of the titanium locking plate in Japan
Takashi Maehara1, Shirou Moritani, Hisanori Ikuma
1Department of Orthopedic Surgery, Kagawa Rosai Hospital, Japan. maehara@kagawah.rofuku.go.jp
Objective:
This study was designed to evaluate the frequency of intraoperative complications associated with titanium locking compression plate (LCP) removal.
Design:
Retrospective study.
Methods:
Medical records were reviewed for surgical technique, plate types used, position and number of screws, time from internal fixation to plate removal, and intraoperative complications. Radiographs were reviewed to evaluate the position of the plates and screws and the accuracy of the screw direction. Mann-Whitney and Yates Chi-square tests were calculated with the level of significance at P < 0.05.
Results:
All LCPs could be removed. Of the 342 locking head screws (LHSs), a total of 21 (6.1%) screws, 3 (2.0%) 5.0 mm screws (3/153) and 18 (10.7%) 3.5 mm screws (18/169), were difficult to remove. The frequency of difficulty associated with the 3.5 mm LHSs was significantly higher than that of the 5.0 mm LHSs (P < 0.01). The frequency of difficulty associated with the removal of LHSs at the diaphysis was higher than that of LHSs at the epiphysis (P < 0.01), especially with 3.5 mm LHSs. The mean age was significantly lower in the patients in whom removal was difficult (P < 0.05). Our analysis revealed that the frequency of removal difficulty was high when a 3.5 mm LHS was inserted into the diaphysis of young patients.
Conclusions:
We should recognize that the removal of LCPs can involve numerous problems and great care should be exercised, especially in cases involving 3.5 mm LHSs.
More Related Videos
15:11Surgical Fixation of Sternal Fractures: Preoperative Planning and a Safe Surgical Technique Using Locked Titanium Plates and Depth Limited Drilling
Published on: January 5, 2015
06:12Plasma Polishing as a New Polishing Option to Reduce the Surface Roughness of Porous Titanium Alloy for 3D Printing
Published on: April 28, 2023