Effect of reinforcement surface functionalization on the mechanical properties of nacre-like bulk lamellar composites...

Alumina platelet reinforced epoxy matrix composites with an architecture resembling to natural nacre were fabricated by a hybrid conventional method called Hot-press Assisted Slip Casting process (HASC). Correlation between processing parameters, platelet content, platelet orientation and mechanical property enhancement of the fabricated composites was examined. In order to investigate the effect of interfacial compatibility and bonding on the mechanical properties of the fabricated inorganic-organic composites, platelet surfaces were modified with both epoxy- and amino-functional silanes. As received and functionalized platelet surfaces were studied by X-Ray Photoelectron Spectroscopy (XPS) to confirm the success of surface modification. Fabricated bio-inspired bulk lamellar composite materials were characterized in terms of their microstructural architecture and mechanical properties. The results obtained indicated that HASC processed composites exhibit enhanced flexural strength, stiffness and hardness, as compared to neat epoxy and composites fabricated by simple mixing, as a result of their nacre-like architecture with well aligned platelets. It has been also observed that functionalization by both type of silanes improves interfacial adhesion between platelets and epoxy matrix resulting in further enhancement of the mechanical properties of bulk lamellar composites fabricated by HASC.