Related Experiment Video
Updated: May 12, 2026
In situ Grazing Incidence Small Angle X-ray Scattering on Roll-To-Roll Coating of Organic Solar Cells with Laboratory X-ray Instrumentation
Published on: March 2, 2021
Plasmonic organic photovoltaic devices with graphene based buffer layers for stability and efficiency enhancement
Emmanuel Stratakis1, Minas M Stylianakis, Emmanuel Koudoumas
1Center of Materials Technology and Photonics & Electrical Engineering Department, School of Applied Technology, Technological Educational Institute (TEI) of Crete, Heraklion, 71004, Crete, Greece.
Abstract:
Enhancement of photoconversion efficiency (PCE) and stability in bulk heterojunction (BHJ) plasmonic organic photovoltaic devices (OPVs) incorporating graphene oxide (GO) thin films as the hole transport layer (HTL) and surfactant free Au nanoparticles (NPs) between the GO HTL and the photoactive layers is demonstrated. In particular the plasmonic GO-based devices exhibited a performance enhancement by 30% compared to the devices using the traditional PEDOT:PSS layer. Likewise, they preserved 50% of their initial PCE after 45 h of continuous illumination, contrary to the PEDOT:PSS-based ones that die after 20 h. The performance increase is attributed to the improved photocurrent and fill factor owing to the enhanced exciton generation rate due to NP-induced plasmon absorption enhancement. Besides this, the stability enhancement can be attributed to limited oxygen and/or indium diffusion from the indium tin oxide (ITO) electrode into the active layer. The industrial exploitation of composite GO/NPs as efficient buffer layers in OPVs is envisaged.
