Synthesis of DNL-6 with a high concentration of Si (4 Al) environments and its application in CO(2) separation

The synthesis of DNL-6 with a high concentration of Si (4 Al) environments [Si/(Si+Al+P)=0.182 mol, denoted as M-DNL-6] is demonstrated. This represents the highest reported concentration of such environments in silicoaluminophosphate (SAPO) molecular sieves. Adsorption studies show that the high Si (4 Al) content in M-DNL-6, with an increased number of Brønsted acid sites in the framework, greatly promotes the adsorption of CO(2). M-DNL-6 exhibits a large CO(2) uptake capacity of up to 6.18 mmol g(-1) at 273 K and 101 kPa, and demonstrates high ratios of CO(2)/CH(4) and CO(2)/N(2) separation. From breakthrough and cycling experiments, M-DNL-6 demonstrates the ability to completely separate CO(2) from CH(4) or N(2) with a dynamic capacity of approximately 8.0 wt % before breakthrough. Importantly, the adsorbed CO(2) is easily released from the adsorbent through a simple gas purging operation at room temperature to regain 95 % of the original adsorption capacity. These results suggest that M-DNL-6 can be used as a potential adsorbent for CO(2) capture in pressure swing adsorption processes.