Related Experiment Video
Updated: May 11, 2026

Characterization of Full Set Material Constants and Their Temperature Dependence for Piezoelectric Materials Using Resonant Ultrasound Spectroscopy
Published on: April 27, 2016
High-temperature (>500°C) ultrasonic transducers: an experimental comparison among three candidate piezoelectric
David Parks1, Shujun Zhang, Bernhard Tittmann
1Department of Engineering Science and Mechanics, The Pennsylvania State University, University Park, PA, USA.
Abstract:
High-temperature piezoelectric crystals, including YCa4O(BO3)3, LiNbO3, and AlN, have been studied for use in ultrasonic transducers under continuous operation for 55 h at 550°C. Additionally, thermal ratcheting tests were performed on the transducers by subjecting the crystals to heat treatments followed by ultrasonic performance testing at room temperature and 500°C. The changes resulting from the heat treatments were less than the statistical spread obtained in repeated experiments and were thus considered negligible. Finally, in situ measurements of the pulse-echo response of YCa4O(BO3)3 were performed at temperatures up to 950°C for the first time, showing stable characteristics up to these high temperatures.

