Related Experiment Video
Updated: May 11, 2026

Determining Viral Disinfection Efficacy of Hot Water Laundering
Published on: June 21, 2022
Safety of the production process of SURFACEN(®) to inactivate and remove virus
Yordank Sánchez1, Enrique Noa, Wilma Alfonso
1AIDS Research Laboratory, Autopista Nacional y Carretera de Jamaica, San José de las Lajas, CP 32700, Mayabeque, Cuba. yorsanchez@infomed.sld.cu
Abstract:
SURFACEN(®) is a biological product produced from pig lungs. Since these animals can be potential sources of microbial pathogens such as viruses, the manufacturing process of this product should guarantee safety from health hazards. The SURFACEN(®) production procedure is capable of effective viral clearance (inactivation/removal) by involving two stages of organic solvent extraction followed by acetone precipitation and heat treatment. In this study, we evaluated the clearance capacity of these four stages for a wide range of viruses by performing spiking experiments. Residual contamination was assessed using a Tissue Culture Infectious Dose assay (log10 TCID50). The validation study demonstrated that, for all viruses tested, the TCID50 titers were reduced by more than 2 log10 in each stage. Total log reduction values achieved were between ≥17.82 log10 and ≥27.93 log10, depending on the virus physical properties, titer, and the number of processing stages applied. Results indicated that the production procedure of SURFACEN(®) can inactivate or remove contaminant viruses from the raw material.
Related Concept Videos
Vaccine Production
Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...
Physical Methods for Controlling Microbial Growth: Radiation and Filtration
Surface Membrane Barriers
The outer layer of the skin, the epidermis, is a robust barrier comprising layers of closely packed keratinized cells. This dense arrangement prevents microbes from penetrating the body. The periodic shedding of epidermal cells...
Methods of Sterilization I: Physical Methods
Steam sterilization uses non-toxic, low-cost moist heat in the form of saturated steam under pressure, which is fast, microbicidal, and sporicidal, and quickly warms and penetrates fabrics. Autoclaves, or steam sterilizers, expose each item to direct steam contact for a predetermined time at the necessary...
Hand hygiene
Hand washing...

